R&D PROJECTS

Indigenous Development of Floating Mechanism for installation of Solar PV


Pilot Sample for 5 kWp Solar PV System Installed @ NTPC, Kayakulum, Kerala Reservoir



M/s NTPC Energy Technology Research Alliance NTPC Limited,
Greater Noida


Translational Research on Biomaterials for Orthopaedic and Dental applications

Prototype Development of in vivo tested HDPE based biocompatible composite with HA/Al2O3 Ceramic Fillers as Acetabular Cup for Total Hip Replacement

The main problem in hip implant is wear of acetabular cup that occur in its inner profile

     

     


Collaborators:

Indian Institute of Scinence, Bangalore


Development of Low Temperature FRP Composite Torque Tube for 200KW HTS Motor


  • Material selection and Testing completed
  • Design Calculations completed
  • FE Analysis – Completed
  • Proto-sample development under Progress

     

M/s Bharat Heavy Electricals Limited (BHEL),
R&D Center, Hyderabad


Development of Oil Splasher (Tractor engine) by Plastic Material

           

Development of polymer components by Metal to Plastic Conversion for tractors and Farm Equipments

  • Selection of suitable polymer material
  • Design of oil splasher for polymer material
  • Analysis and evaluation for suitable functioning
  • Proto-Development

M/s Tractors and Farm Equipments Ltd.,
Chennai


Development of medical image based Physical and Computational Phantoms for radiation Bioassay application


  • The developed model used to demonstrate the feasibility of radiation protection and nuclear medicine bio-assay
  • Development of Lung Phantom model as defined by Medical CT, MRI etc., by reverse engineering
  • Fabrication of Lungs phantoms by rapid prototyping technique

           

     


Failure Analysis and Root Cause of Cracking Issue of Organic Glass (4mm) Used in Helicopter MI-17


  • Raw material analysis
  • Reverse Engineering of Manufacturing and Assembly Process.
  • FEA Study
  • Comparative Study for different manufacturing process.

M/s 3 Base Repair Depot Air Force Station,
Chandigarh

Development of production technology for precision plastic bi-aspheric lenses for indirect ophthalmoscopy

     

       

CENTRAL SCIENTIFIC INSTRUMENTS ORGANISATION,
CHANDIGARH

CENTRAL INSTITUTE OF PLASTICS ENGINEERING &
TECHNOLOGY, CHENNAI

INTERNATIONAL ADVANCED RESEARCH CENTRE FOR
POWDER METALLURGY & NEW MATERIALS (ARCI), HYDERABAD


DESIGN AND DEVELOPMENT OF NON MAGNETIC, NON METALLIC GANTRY FOR HOISTING THE CRYOSTAT

       

M/s Indira Gandhi Centre for Atomic Research
(IGCAR), Kalpakkam


DESIGN, MATERIAL SELECTION AND DEVELOPMENT OF CONCAVE BOTTOM FRP CRYOSTAT FOR MAGNETOCARDIGRAPHY

   

Multichannel whole cortex system with a concave bottom dewar (Illustration)


RAPID PROTOTYPING - SENSOR ARRAY HELMET FOR MAGNETOENCEPHALOGRAPHY

   

   


Design & Development of cost effective components with Plastics for Automobile metal parts : Steering Housing

   

         


Replacement of metal part with plastics to reduce the part weight and hence helps to reduce the part cost and fuel consumption.


PRODUCT DEVELOPMENTS for medical application: NEBULIZER ASSEMBLY

       


MOULDING PROCESS INDUCED ANISOTROPY EFFECT ON BUCKLING ANALYSIS OF FIBER- FILLED PLASTIC CRC PUSH ROD

   



DESIGN AND DEVELOPMENT OF VIBRATOR FOR SQUID VIBRATING SAMPLE MAGNETOMETER



DESIGN OPTIMIZATION OF CONNECTING ROD IN HEAVY COMMERCIAL VEHICLES

   



Home  |  About Us  |  Specialized Training Programme  |  Technical Consultancy  |  Enquiry  |  R & D Facilities  |  Collaborations  |  Our Team  |  Contact Us

Copyrights 2013 © ARSTPS. All Rights Reserved. Designed by CIPET. Contact Web Team: webmaster@cipet.gov.in